Overview
Hammerite Underbody Seal protects areas of your vehicle most prone to abrasion and impact from stones, grit, water and salt in one coat. It’s formulated to remain flexible and will not crack or peel like most bitumen underbody seals. Perfect for use under wings, door-sils, car floors and fuel tanks and easy to use with smooth, non drip application. It also reduces drumming and road noise if applied in door panels and under floor panels.
- Powerful rust inhibitors
- Proven corrosion resistance
- Non drip, super smooth application
- Prolongs your vehicle’s life
| Area | All motor vehicles |
| Recommended Use | Underbody,wheel arches and other high impact areas |
| Coverage | 500ml covers 1m² |
| Drying Time | Overnight |
| Recommended Coats | 1 coat |
| Application Method | Brush |
| VOC Levels | Very High |
| Clean Up | Remove as much paint as possible from the brush before cleaning with brush cleaner |
Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.
- Remove loose rust or paint with a wire brush.
- Remove any heavy deposits of dirt, grease and oil.
- Ensure surface is clean and dry.
Application
Do not apply to sump, gearbox, exhaust system, cables or any mechanical parts
- Brush on to a maximum thickness of 2mm.
- Allow to dry overnight.
- To remove Hammerite Underbody Seal from paintwork, wipe off immediately with white spirit.
Note: Always follow the manufacturer instructions found on the tin.
